Mounting the landing gear – DJI S1000 Plus User Manual

Page 6

Mounting the Landing Gear

Instructions

1. Insert one landing gear leg into each landing skid tube and secure it in place by tightening the M2.5x8

(socket cap) screw. Ensure silicone rubber dampers are attached to each end.

2. Insert the landing gear leg into connection point on the center frame. Affix in place with M3x8 screws.

3. Connect both springs on the legs to the center frame.

Note the springs are 58.5mm before connecting to the center frame, and are stretched to 70mm

when mounting is completed.

Mounting the Landing Gear

M2.5x8

(socket cap)

70mm