Decimator Design DMON-12S - Manual (Page 10)

DMON‐12S Hardware Manual for Firmware Version 1.1
Copyright © 2014 Decimator Design Pty Ltd, Sydney, Australia
10
9. Colours / Safe Title (Parameter)
This is the Safe Title graticule colour and transparency setting.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right through the following colours:
1. None
10. Black (Transparent 25%) 19. Blue (Transparent 0%)
2. Black (Transparent 50%) 11. Blue (Transparent 25%) 20. Green (Transparent 0%)
3. Blue (Transparent 50%) 12. Green (Transparent 25%) 21. Cyan (Transparent 0%)
4. Green (Transparent 50%) 13. Cyan (Transparent 25%) 22. Red (Transparent 0%)
5. Cyan (Transparent 50%) 14. Red (Transparent 25%) 23. Magenta (Transparent 0%)
6. Red (Transparent 50%) 15. Magenta (Transparent 25%) 24. Yellow (Transparent 0%)
7. Magenta (Transparent 50%) 16. Yellow (Transparent 25%) 25. White (Transparent 0%)
8. Yellow (Transparent 50%) 17. White (Transparent 25%)
9. White (Transparent 50%) 18. Black (Transparent 0%)
10. Colours / Centre Cross (Parameter)
This is the Centre Cross colour and transparency setting.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right through the following colours:
1. None
10. Black (Transparent 25%) 19. Blue (Transparent 0%)
2. Black (Transparent 50%) 11. Blue (Transparent 25%) 20. Green (Transparent 0%)
3. Blue (Transparent 50%) 12. Green (Transparent 25%) 21. Cyan (Transparent 0%)
4. Green (Transparent 50%) 13. Cyan (Transparent 25%) 22. Red (Transparent 0%)
5. Cyan (Transparent 50%) 14. Red (Transparent 25%) 23. Magenta (Transparent 0%)
6. Red (Transparent 50%) 15. Magenta (Transparent 25%) 24. Yellow (Transparent 0%)
7. Magenta (Transparent 50%) 16. Yellow (Transparent 25%) 25. White (Transparent 0%)
8. Yellow (Transparent 50%) 17. White (Transparent 25%)
9. White (Transparent 50%) 18. Black (Transparent 0%)
UMDs: (Has SUB‐MENUs)
UMDs
All On
Main Menu <==
Sub Menu
Parameter Window
When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right respectively through the 3 menus below and press the BACK
button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window, unless it is an action Sub Menu.
1. UMDs / All On (Action)
Pressing ENTER when this submenu is selected will turn all UMD overlays on.
2. UMDs / All Off (Action)
Pressing ENTER when this submenu is selected will turn all UMD overlays off.
3. UMDs / UMD Justify (Parameter)
This parameter determines whether the text inside the 16 character window is centred, left or right justified.
When the sub menu is highlighted, press ENTER to toggle through the following options:
1.) Centre
2.) Left
3.) Right