Decimator Design MD-QUAD VERSION 2 HARDWARE - Manual

MD‐QUAD 2/3 FIRMWARE VERSION 1.4 SETTINGS
Copyright © 2012 Decimator Design Pty Ltd, Sydney, Australia 1
MD‐QUAD 2/3
FIRMARE VERSION 1.4 SETTINGS
Please note:
MD‐QUAD 2 hardware has serial numbers starting with MQA or MQB.
MD‐QUAD 3 hardware has serial numbers starting with MQC.
The latest USB Control Software and Specifications for this product can be downloaded at:
www.decimator.com
In Quad Split mode, input 1 is displayed in the top left quadrant, 2 in the Top Right, 3 in the bottom
left and 4 in the bottom right.
Use the rotary to select the menu and press the button to toggle the setting.
When the settings are changed the Power LED will change to Red and change back to Green when
they are saved.
Defaults are highlighted.
For all Menu Subsets when Rotary = 0. Input Status (Button is disabled)
LED Status
LED Description Off Green Red Orange
1 Input 1 Format Detect None SD HD 3G
2 Input 2 Format Detect None SD HD 3G
3 Input 3 Format Detect None SD HD 3G
4 Input 4 Format Detect None SD HD 3G
For all Menu Subsets when Rotary = 1. Menu Subset
LED 1 LED 2 LED 3 LED 4 Menu Subset
Off Off Off Off 0
Off Off Off Green 1
Menu Subset = 0 / Rotary = 2. HDMI Output Type
LED 1 LED 2 LED 3 LED 4 Output
Off Off Off Off DVI RGB 4:4:4, No audio is passed
Off Off Off Green HDMI RGB 4:4:4, 2 Audio channels passed
Off Off Green Off HDMI YCbCr 4:4:4, 2 Audio channels passed
Off Off Green Green HDMI YCbCr 4:2:2, 2 Audio channels passed
Off Green Off Off HDMI RGB 4:4:4, 8 Audio channels passed
Off Green Off Green HDMI YCbCr 4:4:4, 8 Audio channels passed
Off Green Green Off HDMI YCbCr 4:2:2, 8 Audio channels passed
Menu Subset = 0 / Rotary = 3. Output Select
LED 1 LED 2 LED 3 LED 4 Output
Green Green Green Green Quad‐Split (GPI will override)
Green Off Off Off Video Source 1
Off Green Off Off Video Source 2
Off Off Green Off Video Source 3
Off Off Off Green Video Source 4