CommScope Drop Cable - Manual (Page 8)

Braid Shielding and Coaxial Cable Performance
A coaxial cable must have, at minimum, a dual shield of aluminum foil tape overlaid with a woven braid of alumi-
num. This braid shield greatly improves the electrical and mechanical performance of the coax;
in fact, a braid shield can vastly increase the installed life of the cable. All CommScope subscriber access coaxial
cables use a combination of foil and braid shields.
Braid Shielding Provides Low Frequency Protection
Foil shielding is usually a layer of aluminum bonded to a polyester tape. It provides
100% coverage over the dielectric and is best at preventing ingress and leakage of
high frequency signals; however, it is not that effective with lower frequency signals.
Aluminum braid shielding complements foil by containing and preventing interference
from those lower frequencies.
Braid Shielding Helps Maintain DC Resistance
Foil shielding is very flexible but lacking in mechanical strength. Stress caused by installation or by twisting and
flexing over time (like in an aerial installation) will cause microscopic gaps to open in the foil. These ‘microcracks’
degrade the electrical integrity of the foil and cause the DC resistance of the cable to rise. Resistivity gets worse as
the cable twists.
Strong, flexible braid shielding supports the foil and helps fight the formation of microcracks. The braid wires do
not microcrack; they bridge the gaps in the foil. Braid shielding keeps its integrity and delivers low and constant
resistivity numbers even when twisting and flexing.
Braid Shielding Keeps Attenuation Low
Attenuation performance goes hand in hand with DC resistivity; high resistivity caused by microcracks in the foil will
result in higher attenuation. A history of 15,000 flexures can degrade a foil shield to the point where the calculated
attenuation could worsen by 400% or more. However, the robust nature of the additional braid shield keeps at-
tenuation low.
Braid Shielding Keeps Connectors Connected
The additional strength provided by braid shielding gives connectors something to hold onto. In terms of pulloff
force, both compression and crimp-fitted connectors hold much tighter to cables with braid shields.
Braid shields
increase cable
performance
and can
greatly extend
the useful life
of the cable
2.2 Cable Descriptions
The Importance of Braid Shielding