CommScope ConQuest Conduit Construction - Manual (Page 3)

Table of Contents
Section 1 ................Introduction
1.1 ConQuest Conduit Product Line
1.2 Cable-In-Conduit
1.3 Toneable Conduit
1.4 Empty Conduit
1.5 Quality and ISO 9001 Certification
Section 2 ................Handling - Receiving a Shipment
2.1 Inspection of a Shipment
2.2 Unloading
2.3 Unloading with a Forklift
2.4 Product Identification
Section 3.................General Conduit Installation Practices
3.1 Pay-off
3.2 Attaching to ConQuest
3.3 Cutting ConQuest
3.4 Bending ConQuest
3.5 Mechanical Stress
Section 4 ................Underground Installation Methods
4.1 Introduction
4.2 Open Trench Installation Methods
4.3 Moving Reel Method
4.4 Stationary Reel Method
4.5 Backfilling
4.6 Conventional Boring Method
4.7 Horizontal Directional Drilling
4.8 The Drilling Square
4.10 Static Plowing
4.11 Vibratory Static Plowing
4.12 Handling Underground Obstructions
4.13 Pull Plow Method
4.14 Rip and Plow Method
4.15 Existing Conduit
4.16 Submarine Installation
4.20 Underground Placement Equipment
Section 5.................Pulling Cable into Conduit
5.1 Introduction
5.2 Route Geometry
5.3 Fill Percentage
5.4 Pulling Multiple Cables
5.6 Pull Calculations
Table of Contents 0.1
ConQuest ® Conduit Applications and Construction Manual