10k ohm 1/4 watt, 2 programming examples – Brady 1024 User Manual
Page 29
Printing Labels
23
The commands used for bit mapped font loading are usually generated by
font-creation software. However, the Assign Font ID Number command
must be sent to the Printer before the font file. Font Loading Commands
are listed in Table 2-6.
The following sample program is included for reference. The ASCII text
file below will generate the label shown in Figure 2-1.
Command
Character
P
PR
Description
*c###D
N
N
Assign Font ID Number
### = ID Number 100 to 999
P = Must Supply Parameters?(Y/N)
PR = Printer Responds? (Y/N)
Table 2-6 Font Loading Commands
2.2
Programming Examples
H07
D11
19110080100002510K OHM 1/4 WATT
1a6210000000050590PCS
E
10K OHM 1/4 WATT
Figure 2-1 Sample Label