Bully Dog 40440 GT for Jeep Manual - Manual (Page 20)

GT
for Jeep
19
Speed Limiter
Change the top speed that the car will reach before the engine automatically limits the power needed to go faster
Tire Size
Correct the speedometer (and fuel efficiency calculations) if you have changed your tire size from stock.
Axle Ratio
Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle.
If no gear ratio modications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will
ensure that no modifications are made to the stock program.
MDS (4-cylinder mode)
Enabling the Multiple Displacement System (MDS) initiates a fuel saving 4-cylinder engine mode and disables additional engine cylinders.
SPEED LIMITER
ENTER
Up
Down
Set Speed Limiter
By Using The
Up and Down Arrows
112
MPH
(45 to 200)
TIRE SIZE
ENTER
Up
Down
Set Speed Limiter
By Using The
Up and Down Arrows
30.0
INCHES
(23.0 to 45.0)
AXLE RATIO
ENTER
Up
Down
Set Axle Ratio
By Using The
Up and Down Arrows
2.00
:1
(2.00 to 8.00)
MDS
ENTER
Select MDS Setting
Disabled
Enabled