beautypg.com

Gt for jeep, Special functions, Engine fan – Bully Dog 40440 GT for Jeep Manual User Manual

Page 17: Idle adjust, Electronic sway bar -- sway bar disconnect, Tire pressure, Sway bar

background image

GT

for Jeep

16

Special Functions

Engine Fan

Turn the engine fan off for water crossings or run it in high speed mode at any temp.
NOTE: The coolant temperature light will not indicate if the vehicle begins to overheat when the fan is disabled.

Idle Adjust

Set the engine speed (in RPMs) to increase the voltage and provide additional power to the winch.
(This feature does not take effect until the GT for Jeep is at the Main Screen.)
NOTE: This feature only works in park or neutral. It will automatically turn off as soon as the vehicle is put into gear. It will automatically turn back on
the next time the vehicle is put into park or neutral.

Tire Pressure Limit -- Tire Pressure Monitoring System (TPMS)

Eliminate the dash light so the tires can be aired down for increased traction.
GT for Jeep Setting: Chance the stock preset value to a number between 10 and 60 PSI. Once the setting is changed, the stock TPMS system will still
allow for a + or - 6 PSI variation, so the tire pressure could be reduced to as low as 4 PSI.
(The sensors in the tires and the value on a manual pressure tester will not necessarily match.)
(This feature does not take effect until the GT for Jeep is at the Main Screen.)

Electronic Sway Bar -- Sway Bar Disconnect

Rubicon Only
Disconnect the sway bars in 4WD-Low, 4WD-Hi and 2WD up to 30 mph. To use this feature, choose enable and return to the Main Screen, then press the
sway bar button on the vehicle dash.

• At 30 mph and above, the sway bar will automatically reconnect.
• If the vehicle returns to a speed lower than 30 mph, the sway bar will automatically disconnect (if the dash button is still activated).

ENGINE FAN

Go Back

to Options Menu

Select Engine Fan Level

DISABLED

ON

STOCK

IDLE ADJUST

Go Back

to Options Menu

Change Option Preferences

The selected option value:

Idle Adjust

displayed in the box below.

Selected

800 RPM

ENABLED

DISABLED

OPTIONS

500
600
700

800

900

1000
1100
1200

TIRE PRESSURE

Go Back

to Options Menu

Change Option Preferences

The selected option value:

Tire Pressure Limit

displayed in the box below.

Selected

16 PSI

ENABLED

DISABLED

OPTIONS

10
12
14

16

18
20
22
24

SWAY BAR

Go Back

to Options Menu

Change Option Preferences

Select Sway Bar

DISENGAGED

STOCK