Bully Dog 40440 GT for Jeep Manual - Manual (Page 13)

GT
for Jeep
12
Driving Coach Setup
The Driving Coach is a special feature designed to be your fuel economy dashboard and information center. It provides real-time visual and audio
feedback about driving efficiency and where energy is being lost. The driving coach will help you understand the optimal conditions for your
particular vehicle through real-time observation, giving you the power to maximize your vehicle’s fuel economy.
Two hidden bonuses of driving more efficiently are: saving money on fuel and helping the environment!
Before the Driving Coach can give you accurate information, it is important to make sure that the GT is showing the correct speed. In the
sections below, you will find specific instructions for using the Driving Coach to become the best driver you can be.
Set Economy Goal
This option will allow you to select a fuel economy goal. The Driving
Coach will use the economy goal to calculate your driving grade.
It is very important to select an economy goal that is realistic for both
your vehicle and the kind of driving you will be doing. If you will be
driving mainly in the city or on the highway, choose a goal that is very
close to the advertised fuel efficiency for your vehicle in that type of
environment. If you will be doing a mixture, choose an economy goal
between the advertised city and highway mileage for your car.
Reset Average Economy
This option will clear the values stored in the GT for the average fuel
economy, the number of gallons used, and the grade in the Driving Coach.
Adjust Acceleration
This option will allow you to select the GT sensitivity for the acceleration
and deceleration for your vehicle.
Coach Sound Setup
This option will allow you to turn the Driving Coach sounds on or off.
Showing/Hiding the Driving Coach
The driving coach is always running, even if you choose not to have the
information displayed. You can show or hide the driving coach on the
Main Display by holding one of the four bottom left buttons until the
display cycles through to the gauge style that you want.
Set User Options
Set Background Theme
Change the display colors on your GT.
Adjust Backlight
Change the brightness for both the day and the night operating
modes of the GT.
To change between night and day mode, hold both the right
buttons (the up and down buttons) while you are in the general
gauge display.
Set Animation Preferences
Turn the Wave Effect on or off. This effect creates a ripple on the
screen whenever you press a button.
English/Metric Units
Switch between miles/kilometers and gallons/liters.
Reset to Default
Change the user preferences back to the original Bully Dog
default settings. This option does not change other GT features
to default settings.