Bully Dog 40440 GT for Jeep Manual - Manual (Page 12)

GT
for Jeep
11
Gauge Setup (continued)
A/F Ratio 1 & 2
This gauge option shows the ratio of air to fuel. The GT will use
this information to ensure that your engine is using the correct
ratio to completely burn all of the fuel being used and maximize
performance and efficiency.
Only available on Bully Dog Sensor Docking Station part number
40385.
AUX 1, 2 & 3
This gauge option shows the information from sensors connected to
the 0-5V auxiliary inputs on the Bully Dog Sensor Docking Station.
AUX Temp
This gauge option shows the information returned to the Sensor
Docking Station by an optional temperature sensor. The port for
this sensor is marked as 5V out.
Frequency
This gauge option shows the information from a pulsing type of
sensor, like an on-board speed sensor or another optional sensor
that operates on the 0-5kHz 5V pulse range. The port on the Bully
Dog Sensor Docking Station for this gauge option is marked as FN.
Performance Testing
This feature offers drag racers the ability to complete the 1/4 Mile and 0-100 KPH performance tests.
You can also download saved tests from your GT to your computer and analyze it using the Bully Dog Performance Testing Software. The software
is available by free download from
www.bullydog.com . See page 43 for more information about the Performance Testing Software.
There are two different styles available for both tests. The GT will show different test screens based on the style of test that is currently
selected in the Performance Testing Setup Menu.
Speed Sensitive Performance Test
Once this test is begun, the GT will show instructions to the user to first bring the vehicle to a stop. Once the vehicle is at zero miles per hour, the test is
ready. The test will automatically start once the vehicle begins to move.
Race Tree Performance Test
Before initiating the Race Tree style performance test it is important that the vehicle should already be at a complete stop. Once the test is begun, the
GT will display a classic race tree on the screen. As soon as the lights on the tree turn green, the GT will begin to record the vehicle’s time. In this style of
test, the GT will not wait for the vehicle to start moving before it starts recording performance data.
SPECIAL NOTE: Street racing is illegal and extremely unsafe. The performance testing feature should only be used on a sanctioned 1/4 mile drag racing track.
1/4 Mile Performance Test
This option will test the vehicle’s performance until the vehicle has
traveled 1/4 mile.
- View Test Results
View the results for the last performance test that was run.
- Save Previous Test to SD Card
Save the results of the last run to the SD card in the GT. All runs
that are saved to the SD Card can be transferred to your computer
using our Performance Testing Analysis Software. For more infor-
mation on our Performance Testing Analysis software, see page 41
or visit our website:
www.bullydog.com
- Fastest Times
View the results for the quickest 1/4 mile ever recorded.
0-100 KPH Test.
This option will test the vehicle’s performance until the vehicle has
reached a speed of 100 kilometers per hour, which is about the same
speed as 62 miles per hour.
The following gauge options are provided to allow the GT to monitor additional sensors that are only available with the
Bully Dog Sensor Docking Station. For more information about the Sensor Docking Station, see page 59.