Brother HL 1270N - Manual (Page 14)

1-6
❏ Network Ready
The Brother printer has built in multi protocol network capability as standard. This allows
multiple host computers to share the printer on a 10/100Mbit Ethernet network. Any user can
print their job as if the printer was directly connected to their computer. Users on Windows
95/98, Windows NT, Unix, Novell, Apple Macintosh, LAN server and OS/2 Warp server
computer can simultaneously access this printer.
For further information, please refer to the ‘Network manual’ supplied with the printer.
Type/Speed 10/100Base TX Ethernet
Auto speed detection
Protocols TCP/IP
DHCP, BOOTP, RARP, NetBIOS over IP
LPR/LPD, Port9100, Custom Port, POP3/SMTP
SMB Print
TELNET, SNMP, HTTP, TFTP
Novell IPX.SPX (Bindery/NDS)
AppleTalk
Management Web Based Management
BRAdmin32 Windows based management utility
TELNET and Netware Command Console
SNMP/MIB II
HP JetAdmin/ Web JetAdmin Compatible
Firmware update 2MB FLASH ROM. Use BRAdmin32 when
upgrading print server software or BOOTP, TFTP
PUT/GET or IPX for NETWARE
Other Features Windows 95/98 Peer to Peer printing software included as standard.
Brother Card Monitor software included for easy macro/font management.
Brother Internet Print (Printing via Email)
Network Print Configuration button
Password protection for Management Access
Factory reset
Features for providing multiple service creation with
custom setup and rest strings.