Barco Coronis Fusion 10MP - Manual (Page 31)

Coronis Fusion 10MP 31
Luminance target
A
BOUT THE LUMINANCE TARGET
The luminance target of your C
ORONIS
F
USION
10MP display is adjustable
over a predefined range. When you change the luminance target, the
display will adjust its backlight to reach the target.
T
O SET THE LUMINANCE TARGET
:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration menu.
3 Enter the Luminance Target submenu.
4 Set a luminance target value as desired and confirm.
Viewing modes
A
BOUT VIEWING MODES
The C
ORONIS
F
USION
10MP display can be used in two viewing modes:
T
O SELECT A VIEWING MODE
:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration menu.
3 Enter the Viewing Mode submenu.
4 Select Diagnostic/Text as desired and confirm.
Diagnostic This mode provides the full calibrated
luminance and is intended for using the
display for diagnostic purposes.
Text In this mode, the luminance is reduced to
approximately half of the luminance. This is
intended for using the display with office
applications such as word processing.