Barco Coronis Fusion 10MP - Manual (Page 29)

Coronis Fusion 10MP 29
Keys indicator lights
A
BOUT THE KEYS INDICATOR LIGHTS
By default, after lighting up, the keys indicator lights will dim again if no
further actions are taken within the following 5 seconds. However, this
behavior can be changed so that the keys indicator lights are always on
or always off.
T
O CONFIGURE THE KEYS INDICATOR LIGHTS
:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Indicator Lights
menu.
3 Enter the Keys submenu.
4 Select Automatic/Always On/Always Off as desired and confirm.
Power lock function
A
BOUT THE POWER LOCK FUNCTION
By enabling the power lock function, the C
ORONIS
F
USION
10MP display is
forced to remain switched on. This means that it can’t be switched to
stand-by mode until the power lock function is disabled again.
T
O ENABLE
/
DISABLE THE POWER LOCK FUNCTION
:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Controls menu.
3 Enter the Power Lock submenu.
4 Select Enabled/Disabled as desired and confirm.