Bendix Commercial Vehicle Systems SMARTIRE TPMS OPERATORS MANUAL - Manual (Page 59)

59
2. Advance the wheel clockwise to pass both beads over the rim flange simultaneously. The
tire should mount onto the wheel without contacting the sensor.
7.4.4 Re-Mounting Commercial Vehicle Tires Using A Center Post Tire Machine
1. Place the rim on the machine with the mounting shoe at the 9 o’clock position and the
sensor at the 5 o’clock position.
2. Place the tire on the rim with the bottom bead under the flange at the 6 o’clock position
with the mounting shoe at the 9 o’clock position.
3. Advance the mounting shoe clockwise to pass the lower bead over the rim flange.
4. Return the mounting shoe to the 9 o’clock position, depress the upper bead under the rim
flange at the 6 o’clock position and advance the mounting shoe clockwise until the
second bead is completely mounted.
Mounting Shoe
Sensor
Mounting Hook