Bendix Commercial Vehicle Systems SMARTIRE TPMS OPERATORS MANUAL - Manual (Page 21)

21
2. Select the tire you wish to program.
3. Each sensor has a unique ID that the Gateway Receiver uses to identify it. You can
either enter this ID into the Gateway Receiver manually, or trigger the sensor to identify
itself and have the Gateway Receiver automatically learn it.
Having the Gateway Receiver identify the sensor is a slower method than manually
entering the ID, but it is particularly useful if a sensor has already been installed in a tire.
Manual Sensor Learn
a. To do a manual sensor learn enter the ID of the sensor into the green dashed
text box. The ID for the sensor is the 7 digit code on the top label of the sensor
(i.e. 101-1-4-#######).
b. Now click ‘Assign Selected Sensor’. The sensor ID will then appear on the tire
map.