Bendix Commercial Vehicle Systems SMARTIRE TPMS OPERATORS MANUAL - Manual (Page 18)

18
8. If the adaptor is correctly installed and identified, the TPM system details will be filled in
at the bottom of the screen with information from the SmarTire ™ Wireless Gateway.
3.2.3 Configuring Your Vehicle
There are two steps to having the Gateway Receiver learn your vehicle’s configuration:
1. Axle/Tire configuration
2. Sensor Programming
Axle/Tire Configuration
During this step, we must tell the Gateway Receiver how many tires there are on the vehicle and
their locations. Also, we will program the Cold Inflation Pressures (CIP) and Alert Levels. The
alert levels can be changed at anytime later without affecting the vehicle layout, but it is best to
put a default value in at this time.
1. With the SmarTire
™
Diagnostic Tool setup and running, click on the Setup tab (or press
the F6 key).