Bendix Commercial Vehicle Systems EC-60 ESP CONTROLLERS ADV - Manual (Page 32)

32
1st . Blink
Code
11
Location:
J1939
Troubleshooting Diagnostic Trouble Codes:
J1939 Serial Communications
2nd .
Blink
Code
Diagnostic Trouble
Code Description
Repair Information
1 J1939 Serial Link Loss of communications between the Bendix ® EC-60 ™ controller and other devices
connected to the J1939 link. Check for damaged or reversed J1939 wiring. Check
for corroded or damaged connectors. Verify ECU Configuration. Check for other
devices inhibiting J1939 communications.
2 J1939 Retarder Loss of communications between the Bendix EC-60 controller and other devices
connected to the J1939 link. Check for damaged or reversed J1939 wiring. Check
for corroded or damaged connectors. Verify presence of retarder on the J1939 link.
Verify ECU Configuration. Check for other devices inhibiting J1939 communications.
3 J1939 Engine
Communications Loss of communications between the Bendix EC-60 controller and the engine ECU
over the J1939 link. Check for damaged or reversed J1939 wiring. Check for corroded
or damaged connectors. Verify presence of engine ECU on the J1939 link. Verify
ECU Configuration. Check for other devices inhibiting J1939 communications.
4 J1939 Invalid Data
(Engine Retarder) Invalid data received from the engine or retarder. Check for damaged or reversed
J1939 wiring. Check for damaged or corroded connectors. Verify presence of engine
and/or retarder on J1939. Verify proper programming of engine and/or retarder.
Check for other devices inhibiting J1939 communications.
5 J1939 Supply
Pressure Invalid pressure signals received from a vehicle controller. Verify proper operation of
brake demand sensors. Check wiring between brake demand sensors and the vehicle
controller. Verify proper programming of vehicle controller. Check for damaged or
reversed J1939 wiring. Check for damaged or corroded connectors. Check for other
devices inhibiting J1939 communications.
6 J1939 ESP Messages
Invalid Data Invalid ESP messages on the J1939 link. Check for damaged or reversed J1939
wiring. Check for damaged or corroded connectors. Verify presence of engine and/
or retarder on J1939. Verify proper programming of engine and/or retarder. Check
for other devices inhibiting J1939 communications.
7 J1939 Transmission
Communication for
HSA Loss of communications between the EC-60 ECU and the transmission ECU over
the J1939 link. Check for damaged or reversed J1939 wiring. Check for damaged
or corroded connectors. Verify presence of transmission ECU on J1939 link. Check
for other devices inhibiting J1939 communications.
8 J1939 Invalid Data Invalid ESP messages on the J1939 link indicating the additional axle left is not valid.
Check for damaged or reversed J1939 wiring. Check for damaged or corroded
connectors. Check for other devices inhibiting J1939 communications.
10 J1939 Invalid Data
from Transmission Invalid data from transmission message on the J1939 link. Check for damaged or
reversed J1939 wiring. Check for damaged or corroded connectors. Verify presence
of transmission on J1939. Verify proper programming of transmission. Check for
other devices inhibiting J1939 communications.
12 J1939 HSA Switch
Error
Invalid HSA messages on the J1939 link indicating an HSA switch error or unavailable.
Check for damaged or reversed J1939 wiring. Check for damaged or corroded
connectors. Verify presence of HSA switch on J1939. Check for other devices
inhibiting J1939 communications.
13 J1939 Invalid Data Invalid ESP messages on the J1939 link indicating error for ESP AWD function. Check
for damaged or reversed J1939 wiring. Check for damaged or corroded connectors.
Check for other devices inhibiting J1939 communications.