Bang & Olufsen Serene - User Guide - Manual (Page 8)

5 Get started
SIM card information
When you subscribe to a
cellular network, you receive a
plug-in SIM (Subscriber Identity
Module) card loaded with your
subscription details, such as
your PIN code and available
optional services.
Removing the battery
Lift the battery away, as
shown.
Install and charge phone
1. If the phone is already on, first
turn it off by pressing and
holding END.
2. Loosen the screws on the sides
using the supplied screwdriver.
3. Lift the battery cover away, as
shown.
4. Insert the SIM card.
Note: Make sure that the gold-
coloured contacts on the card
face down into the phone.
5. Install the battery.
E910.book Page 5 Monday, November 13, 2006 1:39 PM