Bang & Olufsen Serene - User Guide - Manual (Page 57)

54 >> Settings
Connection settings (Menu 9.8)
Use this menu to create and
customise the profiles containing
the settings for connecting your
phone to the network. You need
these settings to use the web
browser or send MMS messages or
emails.
Note: Your phone is suited for
connecting to the network by
default. If you change the settings
without first checking with your
service provider, the web browser,
MMS, and email features may not
work properly.
Creating a profile
1. Press OK.
Note: If a profile has already
been saved, press OK and select
New connection.
2. Specify following information:
• Profile name: enter a name
for the profile.
• Home URL: enter the address
of the homepage of your
service provider.
• Proxy: activate or deactivate
the proxy server. When this
option is activated, the IP
address and Port options are
activated.
• DNS: activate or deactivate
the DNS address. When this
option is selected, DNS1 and
DNS2 are activated.
• Bearer: select the network
bearer type.
• Advanced settings: change
the advanced options.
When the bearer is set to
GPRS:
APN: enter the access point
name.
Login ID: enter the login ID.
Password: enter the login
password.
When the bearer is set to
GSM:
Dial number: enter the PPP
phone number.
Login ID: enter the login ID.
Password: enter the login
password.
Data call type: select a call
type for data transmission.
3. Select Save to save the profile.
Using profile options
Press OK to access the following
options:
• Edit: edit the profile.
• Delete: delete the selected
profile.
• New connection: add a new
profile.
E910.book Page 54 Monday, November 13, 2006 1:39 PM