Bang & Olufsen Serene - User Guide - Manual (Page 33)

30 Camera
You can use the built-in camera
module to take photos in various
modes. The camera produces JPEG
photos.
To access this menu, press OK in Idle
mode and select Camera.
Notes:
• Do not take photos of people
without their permission.
• Do not take photos in a place where
cameras are not allowed.
• Do not take photos in a place where
you may interfere with another
person’s privacy.
Single shot (Menu 2.1)
You can take a photo in Single shot
mode.
Note: When you take a photo in direct
sunlight or in bright conditions,
shadows may appear on the photo.
Taking a single shot
1. From the Camera menu screen,
select Single shot.
2. When the camera turns on and an
image appears on the display,
position yourself at a right angle
to the subject and aim the camera
lens at the subject.
Notes:
• Be careful not to cover the
camera lens with your hand.
• Tilt and rotate the phone until
the subject is in the centre of
the image.
3. To zoom in or out, turn the wheel
clockwise or counterclockwise.
(Not available for the maximum
image size, 640*480)
4. Press SEND or OK to take a
photo. The photo is saved in the
Photos folder.
Using photo options
After taking a single shot, press OK
to access the following options:
• Take another: return to Capture
mode to take another photo.
• Send via: send the photo via
MMS, email, or Bluetooth.
• Set as caller ID: set the photo as
a caller ID image for a Phonebook
entry.
• Delete: delete the selected photo.
• Rename: change the photo
name.
• Go to photos: go to the Photos
folder. p. 38
• Lock: lock the photo to protect it
from being deleted, or unlock the
photo.
• Details: view the photo
properties.
E910.book Page 30 Monday, November 13, 2006 1:39 PM