Bang & Olufsen Serene - User Guide - Manual (Page 55)

52 >> Settings
4. Enter a Bluetooth PIN code and
press OK. This code is used just
once and you don’t need to
memorise it.
When the owner of the other
device enters the same code,
pairing is complete.
Note: Some devices, especially
headsets or hands-free car kits,
may have a fixed Bluetooth PIN
code, such as 0000. If the other
device has a code, you must enter
it.
Using device options
From the paired device list, scroll to
a device you want and press OK to
access the following options:
Note: Options may vary depending
on the paired device.
• Connect: connect to the
headset or hands-free car kit.
• Disconnect: end the
connection with the device.
• Browse files: search for data
from the device and import data
directly to your phone.
• Service list: display the
Bluetooth service list for the
selected device.
• Rename: change the name of
the device.
• Authorise device/
Unauthorised device:
determine whether or not the
phone asks you to permit
connection when other devices
try to connect to your phone.
• Delete: remove the device from
the device list.
• Delete all: remove all devices
from the device list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select an application,
Phonebook, Library, or
Organiser, in which the item
you want to send is stored.
3. Scroll to the item you want.
4. Press OK and select Send or
Send business card → Via
Bluetooth.
The phone searches for devices
within range and displays a list
of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth
PIN code needed for pairing and
press OK.
E910.book Page 52 Monday, November 13, 2006 1:39 PM