Bang & Olufsen Serene - User Guide - Manual (Page 56)

53
Receiving data via Bluetooth
1. Activate the Bluetooth feature.
2. Set other Bluetooth devices to
search for your phone in the My
phone’s visibility option.
3. If an unauthorised Bluetooth
device sends data to your
phone, press OK to receive data.
Security (Menu 9.7)
Use this menu to protect the phone
against unauthorised use.
Note: If you enter an incorrect PIN /
PIN2 three times in succession, the
SIM card is blocked. To unblock it you
need to enter your PUK/PUK2
(Personal Unblocking Key). The codes
are supplied by your network
operator.
PIN check (Menu 9.7.1)
The 4- to 8-digit PIN (Personal
Identification Number) protects
your SIM card against unauthorised
use. When this feature is enabled,
the phone requires your PIN each
time it is switched on.
Change PIN (Menu 9.7.2)
Use this menu to change your PIN
code. The PIN code check feature
must be enabled to use this
feature.
Phone lock (Menu 9.7.3)
This feature protects the phone
from unauthorised use.
When this feature is enabled, you
must enter a 4- to 8-digit phone
password each time the phone is
switched on.
The password is preset to
00000000. To change the
password, use the Change
password menu.
Change password (Menu 9.7.4)
Use this menu to change your
phone password.
Privacy (Menu 9.7.5)
Use this menu to lock all menu
options on the phone, except call
functions.
When this feature is enabled, you
must enter the phone password to
access menu functions.
SIM lock (Menu 9.7.6)
The SIM lock feature allows your
phone to work only with the
current SIM by assigning a SIM lock
code. You must enter the SIM lock
code to use a different SIM card.
E910.book Page 53 Monday, November 13, 2006 1:39 PM