Bang & Olufsen BeoLink Wireless 1 - User Guide - Manual (Page 7)

Beo4 remote control
This page concerns only a Power
Link setup with an ‘IR-eye’. For
information about Beo4 remote
control operation of link room
products set up with Master Link
cables, refer to the Guides
enclosed with the products.
With the Beo4 remote control
you can switch on the sources
from your main audio or video
system you wish to listen to, and
you can control functions for
those sources – just as if you
were operating your main
system directly.
Functions mentioned here are only
available via BeoLink Wireless 1 if
the source in question is present in
your Bang & Olufsen system and
the source supports the function.
To switch on an Audio source …
> Press RADIO to listen to a radio
programme.
> Press CD to listen to a CD.
> Press A MEM (A TAPE) to listen
to an audio recording.
To switch on a Video source …
> Press TV to listen to TV.
> Press DTV (SAT) to listen to
digital TV.
> Press V MEM (V TAPE) to listen
to a video recording.
> Press DVD to listen to a DVD.
To switch on additional sources …
> Press LIST to display additional
sources, such as N.MUSIC (music
stored on a PC), and then press
GO to switch on a source.
Refer to the Guides supplied with
Beo4 and the audio and video
system for further information on
their operation.
The Beo4 remote control is avail-
able as an optional extra from a
Bang & Olufsen retailer.
TIMER
PLAY
7