Bang & Olufsen BeoLink Wireless 1 - User Guide - Manual (Page 5)

Power Link setup
If your link room product is a pair
of active speakers, they must be
connected to BeoLink Wireless 1
with Power Link cables.
This setup also requires an ‘IR-eye’,
in order to be able to operate the
the system – either by close-up
operation, or with a Bang & Olufsen
remote control.
For operation of such a setup, refer
to pp. 6–8 in this Guide.
For information about installation
of the BeoLink Wireless 1 system,
refer to ‘Set up BeoLink Wireless 1’
(pp. 9–15) in this Guide.
For information about how to set
up the main room system and the
link room products, refer to the
Guides enclosed with the products.
5
Link room system with active speakers and an ’IR-eye’ – set up with a
Power Link connection .