Bang & Olufsen BeoLink Wireless 1 - User Guide - Manual (Page 16)

Option settings
When you have made all the
connections as described on the
previous pages or in the Guides
enclosed with your link room
products, you may start to use
the system. However, in order
for your setup to function
properly, you must Option
program your link room products.
On this page you can find out
which Options to use in your
Power Link setup. For
information about Option
settings for a link room product
in a Master Link setup, refer to
the Guides enclosed with the
products.
In a Power Link setup set the link
room speakers to one of the
following Options:
Option 0: Used if you want to
disable remote control operation
in the link room.
Option 4: Used if you install a link
room setup in the same room as
your main system (for example in
a large L-shaped room with two
separate listening positions).
Option 5: Used if you set up a
Bang & Olufsen television in the
link room.
Option 6: Used in a setup with the
main system in one room, and
the link room setup in another –
as described in this guide (this is
the factory setting).
Ready for use …
Option 4
R T
Option 5
R T
Option 6
R T
16