Bang & Olufsen BeoLink Wireless 1 - User Guide - Manual (Page 17)

Use a Beo4 remote control to set
the Option. The entire system
must be switched to standby:
> While holding down the • button,
press LIST.
> Let go of both buttons.
> Press
LIST repeatedly until
OPTION? is shown in the Beo4
display, and press GO.
> Press LIST repeatedly until L.OPT
is shown in the Beo4 display, and
then key in the appropriate
number ( 0, 4, 5, or 6).
Wireless interference
Signals between the transmitter
and receiver can be influenced by
other systems, such as microwaves
or wireless pc systems, as well as
wireless telephone systems in the
USA. If interferences occur, you
should try to correct it by one or
more of the following measures:
– Reorient or relocate the receiver
to improve reception.
– Increase separation between the
disturbing equipment and the
receiver.
– Consult your Bang & Olufsen
retailer for assistance.
17