Bang & Olufsen BeoLink Wireless 1 - User Guide - Manual (Page 15)

‘IR-eye’ – wall mount
If the ‘IR-eye’ is placed next to a
door and at a suitable height, you
can easily switch on or off by close-
up operation when entering or
leaving the room. Likewise, if it is
placed near your telephone, you
can switch off the speakers while
you are on the phone.
> Use the wall plate as a template
to mark up the holes on the wall.
Insert the screws and wall
anchors, but let the two screw
heads protrude from the wall as
shown (
C/D).
> Place the wall plate onto the rear
of the ‘IR-eye’, and fasten it with
the three screws (B).
> Insert the two protruding screw
heads (D) into the corresponding
‘keyholes’, and turn the ‘IR-eye’
clockwise to fasten it.
B C D
C
C
D
D
B B
B
15