Bang & Olufsen BeoLab 3500 - User Guide - Manual (Page 9)

Examples of source functions …
– Press the number buttons to
enter the program, track or disc
number you want to hear.
– Press or to step through
programs, recordings or tracks.
– Press or to search through a
CD in a single CD player, or step
between CDs in a multi-CD
player.
– Press the yellow button to search
forward through a CD in a multi-
CD player.
– Press the green button to search
backward through a CD in a
multi-CD player
– Press STOP to pause playback.
Press a second time to stop
playback completely
– Press GO to resume playback
– Press • to switch off the link
speaker. Press and hold to switch
off your Bang & Olufsen system
as well.
Refer to the Guide enclosed with
your main system for further
information about source functions.
Additional functions with Beo4 ...
Mute … Pressing the middle of the
volume button while BeoLab 3500
is in standby, corresponds to
touching MUTE • directly on
BeoLab 3500 (see p. 13).
Playback … To start playback on a
secondary video recorder or DVD
player in your main system, press
LIST to display DVD2* (V.TAPE2)
and then
GO.
BeoLab 3500 and the main
system in one room …
When BeoLab 3500 is set up in the
same room as the main system, and
you press a source button, such as
RADIO, CD or TV, the sound is
reproduced through the
loudspeakers in the main system.
However, if you want the sound
reproduced through BeoLab 3500
instead, press
LIST to display LINK*
and then a source button, such as
RADIO, CD or TV.
BeoLab 3500 must be set to Option 4
as explained in ‘Ready for use …’
(p. 22).
9
*NOTE! In order to display these
functions, you must first add them
to the Beo4 list of functions. Refer
to the chapter ‘Customising your
Beo4’ in the Beo4 Guide.