Bang & Olufsen BeoLab 3500 - User Guide - Manual (Page 6)

Close-up operation
You can use the close-up
operation panel to include or
exclude BeoLab 3500 in a Timer
Play you have programmed on
your main audio or video system.
You can also listen in on a source
currently playing on the main
room system.
The Timer Play function is not avail-
able in all Bang & Olufsen systems.
Please refer to the Guide for your
main system. The key marked MUTE • enables
you to listen in on a source that is
currently playing in your main
system.
When you switch BeoLab 3500 on
in this way, you only get sound in
BeoLab 3500 – the loudspeakers in
the main system are not cut in.
– If no source is playing when you
touch MUTE •, BeoLab 3500
switches on the radio in your
main system.
– Touch MUTE • again briefly, and
BeoLab 3500 switches off (a red
standby indicator appears in the
display). If you keep your finger
on the key for two seconds, both
BeoLab 3500 and your main
system switch off simultaneously.
Listen in and mute the sound
TIMER BANG & OLUFSEN MUTE
6
The BeoLab 3500 display and close-up operation panel. If BeoLab 3500 is
included in a Timer Play function, it is indicated by a small red light in the
TIMER key to the left on the display panel.
TIMER key MUTE key