Use a beo4 remote control – Bang & Olufsen BeoLab 3500 - User Guide User Manual
Page 8

Use a Beo4 remote control
The Beo4 remote control enables
you to switch on the source you
wish to listen to from your main
room audio or video system,
and to control functions for that
source – just as if you were
operating your main system
directly.
With Beo4, you can make a
separate Wake-up Timer on
BeoLab 3500, and adjust sound
settings for the link speaker.
Functions mentioned on these pages
are only available via BeoLab 3500
if the source in question is present
in your Bang & Olufsen system and
the source supports the function.
To switch on an Audio source …
> Press
RADIO to listen to a radio
programme.
> Press
CD to listen to a CD.
> Press
A MEM (A TAPE) to listen
to an audio recording.
To switch on a Video source …
> Press
TV to listen to TV.
> Press
DTV (SAT) to listen to
digital TV.
> Press
V MEM (V TAPE) to listen
to a video recording.
> Press
DVD to listen to a DVD.
To switch on additional
sources …
> Press
LIST to display additional
sources, such as
N.MUSIC (music
stored on a PC), and then press
GO to switch on a source.
The Beo4 remote control is avail-
able as an optional extra from your
Bang & Olufsen retailer.
8