Bang & Olufsen BeoLab 3500 - User Guide - Manual (Page 20)

Cable connections …
… In a cable based Master Link
system
Follow the instructions on this
page, if you are going to connect
BeoLab 3500 to the main room
with a Master Link cable.
In the link room: Connect the
Master Link cable (flat multi-pin
plug) to the Master Link socket on
BeoLab 3500, and run the cable to
the ML junction box.
In the main room: Connect the
Master Link cable (flat multi-pin
plug) to the Master Link socket on
the main system, and then run the
cable to the ML junction box.
Inside the junction box, join the
cables as explained in the guide
enclosed with the box. This guide
contains information about the
many possibilities of the box and
how to join the cables.
Finally connect BeoLab 3500 to the
mains supply – and turn on the
power for your main system. For further information about other
accessories, cables, cable covers,
etc., contact your Bang & Olufsen
retailer.
MASTER LINK
MASTER LINK
20
Master Link connection to the
main room system
Main room Link room
ML junction box