Bang & Olufsen BeoLab 3500 - User Guide - Manual (Page 7)

Timer Play control
If you have programmed the main
system to start playing automatically
(Timer Play), BeoLab 3500 can be
included as well. You can activate
or deactivate the Timer Play function
on the close-up operation panel.
> Touch the TIMER key and you
see the current Timer setting of
BeoLab 3500 in the display.
> While the current setting is
displayed, touch the TIMER key
again to change the function
from TIMER (Timer Play) to
NO TIMER (no Timer Play), or
vice versa.
Remote control of Timer Play
When BeoLab 3500 is in standby,
you can use Beo4 to exclude or
include BeoLab 3500 in a Timer
Play programming.
> Press LIST repeatedly until SHIFT is
shown in the display.
> Press 0 to change between
TIMER ON and NO TIMER.
In order to display SHIFT, you must
first add it to the Beo4 list of
functions. Refer to ‘Customising
your Beo4’ in the Beo4 Guide.
Information in the BeoLab 3500
display
TIMER ON
The display shows that BeoLab 3500
is included in a Timer Play
programming.
NO TIMER
The display shows that BeoLab 3500
is excluded from a Timer Play
programming – it will not start up
automatically as programmed on
your main system.
7