Bang & Olufsen BeoLab 3500 - User Guide - Manual (Page 23)

Cleaning BeoLab 3500
Never use alcohol or other solvents to
clean any parts of BeoLab 3500.
Clean the metal surfaces using a dry,
soft cloth. If necessary, remove
grease stains or persistent dirt with
a lint-free, firmly wrung cloth, dipped
in a solution of water containing
only a few drops of mild detergent,
such as washing-up liquid.
The centre part of BeoLab 3500
(display and buttons), is coated with
a special ‘self-healing’ protective
varnish. This means that minor
scratches will ‘heal’ by themselves.
Only a dry cloth must be used to
clean this part.
The front cloth may be cleaned
with a vacuum cleaner with a soft
brush nozzle, and set to the lowest
suction level.
23