Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 49)

49
Watch Camcorder on your television
To watch your Camcorder recordings, connect
the Camcorder and switch the television on.
When you start playback on your camera, the
television automatically registers the signal
and you can see the pictures from the
Camcorder on the screen.
Connect your Camcorder and
start playback on the
Camcorder…
Press to switch on the television
– the Camcorder signal appears
automatically
If the signal from the
Camcorder is switched off…
Press repeatedly to display
CAMCORD* on Beo4 and press
GO
*In order to display CAMCORD
on Beo4, you must first add it to
the Beo4 list of functions. For
further information, refer to the
chapter ‘Customise Beo4’ on the
CD-rom.
Copy from a Camcorder
If you have connected a video tape recorder,
such as a BeoCord V 8000, to your television,
and you connect your Camcorder to the close-
up socket panel, you can copy Camcorder
recordings onto a videotape. While the tape
is being copied, you can watch a TV
programme or switch the television to
standby.
Connect your Camcorder and
start playback on the
Camcorder…
Press to prepare BeoCord V 8000
for recording
Press again to start recording
Press V TAPE and then STOP to
pause a recording
Press to resume a paused
recording, or…
…press again to stop a recording
entirely
TV
LIST
CAMCORD
GO
RECORD
RECORD
V TAPE
STOP
RECORD
STOP