Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 35)

35
Set positions for the television to turn to
If your television is equipped with the
optional motorised stand, you can
turn it using the Beo4 remote
control.
Furthermore, you can program the
television to turn automatically to
face your favourite viewing position
when you switch on the TV, and turn
away to a standby position when you
switch it off.
You can also turn the television by
hand.
Choose one stand position for when you
switch the television on and one for when
you switch it off. You can also choose a
secondary viewing position, if you have more
than one favourite viewing angle.
Choose stand position 1 for primary viewing
position, 2 for secondary viewing position, or 0 for
standby position.
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 4 to bring up the Stand menu.
> Press p until the appropriate stand position is
displayed.
> Press l or n to turn the television to the desired
position.
> Press GO to store the position.
> Repeat the procedure for other stand positions.
> Press
EXIT to leave all menus.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
Stand position
1
Turn TV to preferred position