Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 47)

47
Cleaning the Beo4
Wipe the Beo4 remote control with a soft,
lint-free, firmly wrung cloth.
Changing the batteries…
When ‘BATTERY’ appears in the Beo4 display,
it is time to change the batteries in the
remote control.
The Beo4 requires three batteries. We
recommend that you use 1.5 volt (size AAA)
Alkaline batteries only. Replace the batteries
as shown on this page, keep a finger on top
of the batteries until the lid is replaced.
When you have replaced the batteries, you
must wait for about 10 seconds until ‘TV’
appears in the display. The Beo4 remote
control is then ready to operate again.
1
2
3
1
2