Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 44)

44
The socket panels
The socket panel on your television
allows you to connect signal input
cables as well as a variety of extra
equipment, such as a video tape
recorder or a linked Bang & Olufsen
audio system.
The V.TAPE, AV and DECODER
sockets are available for connection
of extra equipment.
Any equipment you connect to these
sockets must be registered in the
Connections menu. For further
information, refer to the chapter
‘Register and use additional video
equipment’ on page 32.
Speaker and digital input socket
panel
FRONT
The two sockets are used for connecting the
external front speakers in a surround sound
setup.
REAR
The two sockets are used for connecting the
external rear speakers in a surround sound
setup.
SUBWOOFER
Socket used for connecting a BeoLab 2
subwoofer in a surround sound setup.
INPUT 1
Digital input socket (S/P DIF) for connection
of for example a set-top box. INPUT 1 is for
digital input from equipment connected to
the AV socket on the television.
INPUT 2
Digital input socket (S/P DIF) for connection
of e.g. a set-top box. INPUT 2 is for digital
input from equipment connected to the
V.TAPE socket on the television. If the V.TAPE
socket is set up for V.tape or None, the
INPUT 2 socket is dedicated to the equipment
connected to the DECODER socket instead.
The speaker and digital input sockets are only
available if your television is equipped with the
optional surround sound module.
REAR SUBWOOFER REAR
FRONT FRONT INPUT 1
INPUT 2