Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 32)

32
Register and use additional video equipment
If you connect additional video
sources or equipment to your
television, you must register the
equipment in the Connections menu.
The settings you select in the
Connections menu tell the television
what is connected.
For information about where and
how to connect extra equipment,
refer to the chapters ‘Connect
additional equipment’ on page 43 as
well as ‘The socket panels’ on page
44.
When your additional video
equipment has been connected and
registered in the Connections menu,
as described, you can operate it with
the Beo4 remote control.
What is connected?
Registering the equipment connected to the
television enables you to activate it with the
Beo4 remote control.
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 4 to bring up the Connections menu (5 if
your television is equipped with the optional
motorised stand).
> Press n to select a socket.
> Press m or p to step through the list of
available equipment types until you find what
you have connected. Select None if nothing is
connected.
> When you have selected your equipment types,
press GO to store your settings, or…
> …press EXIT to leave all menus without storing.
Equipment you can connect to each socket
V.Tape
V.Tape… for a Bang & Olufsen video tape
recorder
DVD… for a DVD player
STB (SAT), STB (V.AUX)… for a set-top box*
None… if nothing is connected
AV
DVD… for a DVD player
STB (SAT), STB (V.AUX)… for a set-top box*
V.AUX… for other equipment
Non B&O V.Tape2… for a non-Bang & Olufsen
video tape recorder
V.Tape2… for a Bang & Olufsen video tape
recorder
S-VHS V.TP2… for a Super-VHS video tape
recorder
Decoder(2)… for a second decoder – Connect
your primary decoder to the DECODER socket
None… if nothing is connected
Decoder
Decoder(1)… for a primary decoder or expander
box
STB (SAT), STB (V.AUX)… for a set-top box*
V.AUX… for other non-Bang & Olufsen
equipment
Non B&O V.Tape2… for a non-Bang & Olufsen
video tape recorder
None… if nothing is connected
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
V. Tape AV Decoder
V.Tape None Decoder
*NOTE: Choose STB (SAT) for a primary set-top
box and STB (V.AUX) for a secondary set-top box.