beautypg.com

Adjust picture and sound settings, Change brilliance, colour or contrast – Bang & Olufsen BeoVision 3-32 - User Guide User Manual

Page 36

background image

36

Adjust picture and sound settings

Picture and sound settings are preset
at the factory to neutral values which
suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your
liking.

Adjust picture brilliance, colour or
contrast. Sound settings include
volume, bass, treble, loudness, and
balance. You can also adjust
subwoofer level, if BeoLab 2 is part
of your setup.

Store your picture and sound settings
temporarily – until your television is
switched off – or store them
permanently.

For further information on how to
change the picture format refer to
the chapter ‘Home Theatre’ on page
10.

Change brilliance, colour or contrast

Adjust the picture settings via the Picture
menu.

For video sources using the NTSC signal a fourth
option – TINT (colour shade or nuance) – will be
available for adjustment.

To change brilliance, colour or contrast…
> Press

MENU to bring up the main menu.

> Press

3 to bring up the Setup menu.

> Press

3 to bring up the Picture menu.

> Press l or n to move between the items on the

menu.

> Press m or p to adjust the settings for each

item.

> Press

EXIT to store your settings until you

switch off the television, or…

> …press

GO to store your settings permanently.

Setup

1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock

Brilliance

Colour

Contrast

32

32

44