Autocue PC 90 - Manual (Page 7)

PC 90 MANUAL
VERSION 1.0 7  AUTOCUE 2001
Stand Configurations (Individual)
In this mode the PC90’s work on the principle of one stand at a time being controlled individually. The stands must be numbered 1 to 9 use
the Stand number selector switch that is located on the ‘Shoulder of each stand to change the number.
When the stand number 1 is selected and a new height is entered stand 1 will move to the new height.
When the stand number 2 is selected and a new height is entered stand 2 will move to the new height.
A maximum of 8 stands can be controlled in this way.
Set to No 1. Set to No 2. Set to No 3.
Stand Number Selector