System set-up, Installation for autocue pc 90 – Autocue PC 90 User Manual
Page 4
PC 90 MANUAL
VERSION 1.0
4
AUTOCUE 2001
Installation for Autocue PC 90
In this chapter describes the requirements needed to use the Autocue
PC 90 in easy to follow instructions.
The installation of
Autocue’s PC 90 is simple and can be covered in 3 easy steps.
Chapter
1
1.
System Set-up
2.
3.
1. Place the PC 90 on a level surface and open the support doors.
2. Stand the 15” FDP Monitor or 17” CRT Monitor onto the PC 90. (15” FDP Monitor shown.)
3.
Ensure that the unit is stable by adjusting the angle of the support doors.