Ambient Controller - ACC 501 - Manual (Page 9)

ACC501
www.ambient.de
7
4. Menus
4.1 CONF menu
This is a general menu for the controller status and control and monitoring of peripherals.
Select option by pressing corresponding number.
1: Display:
Change display contrast and default backlight brightness and switch off time.
2: Infrared:
Displays transceived ASCII characters, allows for a test and reset.
3: Power supply:
Shows voltages at power inputs.
4: System Info:
Shows the serial number of the unit and the software versions of the various modules
currently loaded.
Upon start up, the ACC501 checks if a ACCSI (Ambient Serial Interface) is connected and
displays the firmware version:
Please note: From board revision “A” on the revision is displayed next to the serial number.