Ambient Controller - ACC 501 - Manual (Page 7)

ACC501
www.ambient.de
5
2.9 Keypad
The keypad is organized with the menu and command cursors on the right and general
editing cursors on the left. These keys can double as hold/log when logging on the fly.
There is a red escape key on the left which doubles as an on/off switch and a green enter
key on the right. Underneath there are 0-9 number keys in black with secondary functions in
red and a shift key on the left. The 4 domed Allen screws protect the keypad surface.
2.10 Display
The display is a 128 X 64 pixel graphic display with selectable contrast. The white LED
backlight can be adjusted in intensity and turned off completely for reducing the power
consumption. The display is organized with a menu bar at the top and a command bar at the
bottom. Movement within these bars is done by 4 cursor keys at the right of the display, two
keys for left/right scroll for the menu bar at the top and 2 keys, left/ right scroll for the
command bar at the bottom. The relevant status of the controller is shown in the remaining
space between these bars.
A command is executed by selecting the respective command and then pressing ENTER or
pressing the relating numeric hot-key shown in the command bar. ESC returns to the
command line.
Battery symbol
This shows only the level of the internal 4xAA batteries, not the external source, for this see
Power Supply in the “Config” menu.
We welcome any comments or software ideas for this new controller. Please get in touch
with us for your suggestions.