AJA TruZoom - Manual (Page 42)

TruZoom v1.1 www.aja.com 42
3. Click/press the Record button a second time or the Esc key on the keyboard to end
the current recording.
4. When the recording is complete, TruZoom returns to the operating mode from which
the recording was launched: either Live or Playback mode. If the recording was
launched from playback mode, the newly recorded clip is loaded and cued to the first
frame, ready for play.
The recorded clip is automatically placed into the playback folder list and selected so it is
ready for playback in Playback Mode.
Playback Mode
Playback mode is used to play clips, setup ROIs, and create and run timelines that control
clip-playback and ROI dynamics.
Figure 30. TruZoom Playback Mode UI Screen
Playback Mode
Screen Description
The Playback Mode screen is different from the Live Mode screen, with Timeline Editing
controls replacing the Virtual Camera controls, and Timeline Run controls below.
Preview Display: The main central area of the Playback mode screen shows the full raster of the loaded
clip’s video. It also indicates the currently selected ROI as a red rectangle.
Live/Playback Buttons: Refer to “TruZoom Operating Modes” on page 34 .”