Workstation pcie card locations, Raid storage capacity – AJA TruZoom User Manual
Page 14
![background image](/manuals/581846/14/background.png)
TruZoom v1.1
www.aja.com
14
SAS/SATA drive cage::
The Athena Power drive cage is the approved drive cage. Each drive cage can house four
(4) SSD drives, so two drive cages are required.
Detailed product information can be found at:
http://athenapower.com/node/99
SAS/SATA cables::
• SFF-8087 (device) to 4xSATA (host) fanout cable
• Two fanout cables are required to connect the LSI RAID controller to the Intel SSD
drives housed in the two Athena Power drive cages.
• These cables can be sourced from several on-line retailers.
Graphics card:
High speed GPU equipped graphics card
Computer components:
• Touch-screen monitor
• Mouse with scroll wheel
• Keyboard
Workstation PCIe Card
Locations
Two configurations of these PCIe cards that have been tested and approved. Choose one
of the options from the following chart and install the cards into the recommended PCIe
slots on the system’s motherboard.
RAID Storage Capacity
For 10-bit RGB 4K at a resolution of 4096x2160 and 60fps, total record times in minutes
for the qualified RAID configurations are as follows:
Table 1. Options for PCIe Card Locations for HP820
Slot
Option 1
Option 2
Slot 1
Empty
Empty
Slot 2
GPU
GPU
Slot 3
Empty/Covered by GPU
Empty/Covered by GPU
Slot 4
Corvid Ultra HIB
LSI Controller
Slot 5
Empty
Empty
Slot 6
LSI Controller
Corvid Ultra HIB
Slot 7
Empty
Empty
Table 2. RAID Configuration Storage Capacity
SSD Configuration Record Time (minutes)
8 x 240GB
16
8 x 300GB
20
8 x 480GB
32
8 x 600GB
40
8 x 800GB
53