Rockwell Automation T3832 ICS Regent Historian Package for Winterpret - Manual (Page 34)

Historian Package for W INTERPRET (T3832)
3 4
Industrial Control Services
After opening a log file, you can subsequently choose Monitor
and Collect from the Control Menu to begin retrieving the
historian data from the Regent.
Close Log File
This command will close the opened log file and save it to disk.
You must have a log file open to use this command. After
closing the log file you must use the Open Log File Command
before you can again retrieve historian data from the Regent.
Clear Log File
This command will clear the contents of the log file that is
currently open, removing any previously recorded and saved
historian data from the log file on the PC. You must have a
log file open before you can use this command.
This command does not clear the historical buffer of the
function block in the Regent. The historical buffer in the
Regent is only cleared when the Clear Contact for the
function block is on.
Print Log File
Use this command to print the entire contents of the currently
opened log file. You must have a Log File open to use this
command.
View Function Block Source
Use this command to open a dialog to display the list of
variables configured for the process historian function block.
Important!