Required software, Parts list, Additional resources – Rockwell Automation Logix5000 Control Systems: Connect ArmorBlock I/O Modules over Ethernet Quick Start User Manual
Page 8: Required software parts list additional resources
8
Rockwell Automation Publication IASIMP-QS039A-EN-P - July 2013
Preface
Required Software
The module and the applications described in this publication are compatible with the following firmware revisions and
software versions.
Parts List
The following components are required to complete the tasks described in this publication.
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
You can view or download publications at
o order paper copies of
technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.
Product
Firmware Revision / Software Version
1756-EN2T, 1756-EN2TR, 1756-EN3TR
3.000 revision when using RSLogix 5000 version 20 or Studio 5000 Logix Designer™ version 21 or later
RSLogix 5000 software
20.00.00 or later
RSLinx software
2.56.00 or later
BOOTP/DHCP utility
Version automatically installed with RSLogix 5000 software or Studio 5000™ environment and varies according to that
software’s version.
Description
Catalog No
Quantity
Logix 5565 controller
1756-L65
1
Ethernet I/P module
1756-EN2T
1
1732E ArmorBlock EtherNet/IP module
1732E-OB16M12R
1
Resource
Description
1732E EtherNet/IP ArmorBlock supporting Sequence of Events User manual,
publication
Provides a detailed description of how to install, configure, and use your 1732E-IB16M12SOEDR
module.
1732E ArmorBlock 2 Port Ethernet Module Installation Instructions,
publication
Provides information on installing the ArmorBlock 2-port EtherNet/IP module.
1732E EtherNet/IP Dual Port 8-Point Digital Modules Installation Instructions,
publication
Describes how to install your 1732E Dual-port 8-point Digital Module.
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD
Input, publication
Describes how to install your 1732E ArmorBlock Dual-port EtherNet/IP 4-point Thermocouple and
RTD Input Module.
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Analog Input/Output User
Manual, publicat
Describes how to install, configure, and troubleshoot your 1732E Dual-port EtherNet/IP 4-point
Analog Input and Output Modules.
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD User
Manual, publicat
Provides a detailed description of module functionality, configuration, installation and information
on how to use the ArmorBlock Dual-port EtherNet/IP 4-point Thermocouple and RTD modules.
Logix5000 Controllers Common Procedures Programming Manual,
publication
Provides details about adding and configuring modules, establishing communication, and writing
ladder logic.
Industrial Automation Wiring and Grounding Guidelines, publication
0-4.1.
Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website,
http://www.ab.com
Provides declarations of conformity, certificates, and other certification details.