Rockwell Automation Flex/WebPak 3000 DC Drive AC Line Discon Kit 1.5-30 HP-230VAC, 3-60 HP-460VAC - Manual (Page 5)

AC Line Disconnect Kit for FlexPak 3000 and WebPak 3000 Drives 5
Step 11. Re-attach the incoming AC line wiring to the AC Line Disconnect according to the following table (see
figure 3C for the location of the AC Line Disconnect incoming power terminals).
Step 12. Torque the nuts on AC Line Disconnect terminals 81, 82, and 83 to 55 in-lb (6.2 Nm).
Step 13. Replace the drive cover and secure it in place with its screws (see figure 3D).
Step 14. Remove the lockout and tag.
Step 15. Turn on power to the drive.
Step 16. Check for proper drive operation.
Original Terminal Block Connection Attach to AC Line Disconnect Terminal
181 81
182 82
183 83