Rockwell Automation RECOMM-485 RS485 DFI Communications Module - Manual (Page 23)

Configuring the RS485 DF1 Module 4-1
C
HAPTER
4
Configuring the
RS485 DF1 Module
Chapter 4 provides instructions and information for setting the
parameters in the module.
For a complete list of parameters, refer to Appendix B, RS485 DF1
Module Parameters. For definitions of terms in this chapter, refer to
the Glossary.
4.1 Configuration Tools
The module stores parameters and other information in its own non-
volatile memory. Therefore, you must access the module to view
and edit its parameters. Table 4.1 lists the tools that can be used to
access the module parameters.
Table 4.1 – Configuration Tools
Tool Refer to:
VS Utilities Software VS Utilities online help
LCD OIM Section 4.2