Rockwell Automation MinPak Plus Remote Adapter Kit 14C220 - Manual

INSTRUCTION MANUAL DĆ3979
ACCESSORY
REMOTE ADAPTER KIT
MODEL NUMBER 14C220
The equipment described below should be installed only by qualified electrical maintenance personnel
familiar with the construction and operation of the equipment and the hazards involved.
DANGER
CONTROLLER EQUIPMENT IS AT LINE VOLTĆ
AGE WHEN AĆC POWER IS CONNECTED TO
THE POWER UNIT IN THE MINPAK PLUS CONĆ
TROLLER. THUS, AĆC POWER MUST BE REĆ
MOVED FROM THE UNIT BEFORE IT IS SAFE
TO TOUCH INTERNAL PARTS OF THE CONĆ
TROLLER. PERSONAL INJURY MAY RESULT
UNLESS POWER IS REMOVED.
DESCRIPTION
The optional Remote Operator Adapter Kit allows the loĆ
cating of operator controls some distance from the ConĆ
troller.
In addition to a Remote Operator Adapter Module, this
Kit contains all the mounting hardware necessary to seĆ
cure the Module. (Refer to Figure 1.) However, one may
also need to order 2 additional options from Reliance.
Briefly, the following three steps describe what must be
done:
D Select the blank Remote Operator ,Station Cover
Faceplate if not supplied as standard. Otherwise.
order Model Number 14C200.
D Order a Remote Operator Adapter Kit, Model
14C220. (This unit provides a connection point for
the Remote Station .)
D Specify a Reliance Remote Operator Control StaĆ
tion. Connect it to the controller.
Reliance offers a variety of Remote Operator Stations
that are compatible with the MinPak Plus controller. (ReĆ
fer to Table 1.A).
Figure 1 - Remote Operators Adapter Module
W/Terminal Markings